Loading trays, Loading tray 1 – HP 2830 User Manual

Page 44

Loading trays

Load special print media, such as envelopes, labels, and transparencies, in tray 1 only.

Note

Because tray 2 is not included for all models, it is referred to as optional tray 2 in this
documentation.

Loading tray 1

Tray 1 (the multipurpose tray) holds up to 125 sheets of paper or other print media, or it
holds up to 10 envelopes.

CAUTION

Avoid adding print media to tray 1 while the printer is printing, or jams can occur. Do not fan
paper before loading it into trays, and avoid overloading trays.

To load tray 1

1. Open tray 1.

2. Slide out the tray extender. If the print media being loaded is longer than 23 cm (9

inches), also open the additional tray extender.

3. Slide the media-width guides slightly wider than the print media.

4. Place print media into the tray with the side to be printed upon face-up, and the top,

short edge in first.

Note

If you are manually duplexing, see

Printing on both sides (duplexing manually)

for loading

instructions.

Chapter 4 Using the device

ENWW