HP 2830 - Manual (Page 139)

Scanning from the device and HP Director (Macintosh)
The procedures described in this section are for Macintosh OS 10.2 and 10.3. Procedures
for Macintosh OS 9.2.2 might vary.
For more information about tasks and settings described in this section, see the HP Director
online Help.
For more detailed instructions about loading original documents onto the flatbed scanner or
into the automatic document feeder (ADF) input tray, see
Loading documents to scan .
Scanning to e-mail
1. Load the originals that are to be scanned face-up in the automatic document feeder
(ADF) input tray. Adjust the media guides to hold the originals in place.
OR
Lift the flatbed scanner lid and load the original that is to be scanned face-down on the
flatbed scanner with the upper-left corner of the document at the lower-right corner of
the glass. Gently close the lid.
2. On the device control panel, press S
CAN
T
O
.
3. Use the < or the > button to select an e-mail program such as Apple Mail.
4. Press S
TART
S
CAN
. The original is scanned. The e-mail program that you selected in step
3 opens on the computer. A blank e-mail message opens with the scanned document as
an attachment.
Note If you start the scan by clicking Scan to Email in the HP Director, the original is scanned to
the default e-mail program.
5. Enter an e-mail recipient, add text or other attachments, and then send the message.
ENWW Scanning from the device and HP Director (Macintosh) 123