Changing autoreduction settings for incoming faxes, To change autoreduction for incoming faxes – HP 2830 User Manual

Page 112

Changing autoreduction settings for incoming faxes

If the fit-to-page option is turned on, the device automatically reduces long faxes up to 75
percent to fit the information on the default paper size (for example, the fax is reduced from
legal to letter size).

If the fit-to-page option is turned off, long faxes print at full size on multiple pages. The
factory-set default for incoming fax autoreduction is On.

If you have the stamp-received faxes option turned on, you might also want to turn on
autoreduction. This reduces the size of the incoming faxes slightly, and prevents the page-
stamp from forcing a fax onto two pages.

Note

Make sure that the media-size setting matches the size of the media that is loaded in the
media input tray. To change the default media size, see

Changing the default media size

To change autoreduction for incoming faxes

1. On the device control panel, press

ENU

2. Use the

or the

button to select Fax setup, and then press

NTER

3. Use the

or the

button to select Fax Recv. setup, and then press

NTER

4. Use the

or the

button to select Fit to page, and then press

NTER

5. Use the

or the

button to select On or Off, and then press

NTER

to save your

selection.

Chapter 8 Fax

ENWW