HP RP3440 - Manual (Page 90)

Table 3-4 Setup Checklist (continued)
X Action Step
Choose one of the three methods to configure the LAN for iLO
MP access:
• DHCP with DNS
• ARP Ping
• RS-232 serial port Configure the iLO MP LAN 2
Log in to the iLO MP from a supported web browser or command
line using the default user name and password. Log on to the iLO MP 3
Change the default user name and password on the administrator
account to your predefined selections. Change default user name and
password 4
Set up the user accounts if you are using the local accounts feature. Set up user accounts 5
Set up the security access settings. Set up security access 6
Advanced Setup
Activate advanced features by entering a license key. Activate Advanced Pack Features 1
Setup Flowchart
Use this flowchart as a guide to assist in the iLO MP setup process.
90 Installing the System