GeoVision GV-AS2120 IP Control Panel - Manual (Page 52)

50
2.1 Introduction
GV-AS110 / 1110 is a single door controller with a built-in reader. You can connect one
more card reader to GV-AS110 and up to two more card readers to GV-AS1110 for entry
and exit applications. GV-AS110 comes with built-in RS-485 and Wiegand interface, while
GV-AS1110 comes with TCP/IP network port.
GV-AS110 / 1110 has the capability to store up to one thousand cards under standalone
mode and up to 40,000 cards when connected to GV-ASManager. Programming of GV-
AS110 / 1110 can be done either on the keypad or from the software GV-ASManager.
An economic solution for access control, GV-AS110 / 1110 is suitable for controlling doors,
parking gates and access to elevator call buttons.
Wiegand Reader
OUT
RS-485
GV-HUB / GV-COM /
GV-NET/IO Card V3.1
RS-232
GV-AS110
IN
GV-ASManager
Door
Network Reader (x2)
IN or OUT
GV-ASManager
GV-AS1110
IN
TCP/IP
Door
Figure 2-1