GeoVision GV-AS2120 IP Control Panel User Manual
Page 146
144
Configuring the GV-AS / GV-EV Controller on Internet
After acquiring a domain name from the DDNS Server, you need to configure the registered
domain name on the controller to access the controller by the domain name on Internet.
1. Open an Internet browser, and type the default IP address
The
login dialog box (Figure 7-2) appears.
2. In the User Name and Password fields, type default value
admin
and
admin
respectively. Click
OK
. The Network Configuration page (Figure 7-10) appears.
3. Click
Enable
, and select
Send to DDNS
.
4. Type
Host Name
,
User Name
and
Password
that are registered on the DDNS Server. If
you select
GeoVision DDNS
, the system will automatically bring up the Host Name.
Figure 7-10
5. Click
Submit
. When the setting is complete, the Status field will indicate:
Register
Success
. Then GV-AS / GV-EV Controller can be accessed with the domain name.