GeoVision GV-AS2120 IP Control Panel - Manual (Page 151)

The Web Interface
149
8
=
4
7
8.1.2 Upgrading Firmware
Follow the steps below to update the firmware of the controller .
1. In the left menu, click
Firmware Update
. This page appears.
Figure 8-3
2. Click the Browse… button to open the firmware file (*.bin)
3. Click the
Upload
button. This update procedure may take 60 seconds to complete.
4. When the Update is complete, a dialog box appears and asks you to reboot the system.
Figure 8-4
5. Click
OK
. The controller starts the Reboot operation.
Note:
1. Make sure the controller remains powered on during the firmware upgrade.
2. It is required to reboot controller after firmware update. Without rebooting, the
firmware update is not complete.