Epson SureLab D570 Professional Minilab Photo Printer - Manual (Page 83)

Item Functions
A Auto Nozzle Check Set the conditions in which an automatic nozzle check is done. Select one of the
following.
❏ High quality
You can print at high print quality because you can execute a Nozzle Check
automatically before printing and stop printing if clogged nozzles are
detected while printing.
You can set all the items from
B to F .
❏ Normal
Automatic nozzle check is done less frequently than when
High quality is
set.
Nozzle Check before printing ( B ) and Action when printing trouble is
detected ( F ) are disabled. Also, you can set more sheets for executing
Periodic Check ( C ) than the number of sheets when High quality is set.
❏ Off
Nozzles are not checked automatically. Select his when you want to visually
confirm the printed check pattern to confirm the state of the nozzles.
❏ Default
Returns all the settings (
A to F ) in the Auto Nozzle Check Settings screen to
the manufacturer’s settings.
B Nozzle Check before printing You can set this when High quality is selected in Auto Nozzle Check ( A ).
Set whether to execute auto nozzle check before printing.
When set to Auto , auto Nozzle Check is executed according to the state of the
printer, such as after changing the auto nozzle check settings, or after executing
nozzle cleaning.
When set to Every time , auto nozzle check is executed for each print job.
C Periodic Check Set the time to execute auto nozzle check according to the number of sheets
printed.
If the number of sheets being printed for a single job exceeds the number of
printed sheets set for this item, then the number of sheets for that job is printed,
after which auto nozzle check is executed.
D Nozzle Compensation Set the print quality for when normal nozzles compensate for the ink that could
not be ejected by clogged nozzles.
E Auto Cleaning Sets the number of times to do auto cleaning when clogged nozzles are detected.
F Action when printing trouble is
detected You can set this when High quality is selected in Auto Nozzle Check ( A ).
Sets whether to stop printing when clogged nozzles are detected.
When set to Stop Immediately , printing is stopped when clogged nozzles are
detected.
When set to Ignore , printing is continued even if clogged nozzles are detected.
G Set button Clicking this reflects the changes to each item A to F .
SL-D500 Series User's Guide
Using the Maintenance Tool (Mac)
83