Epson SureLab D570 Professional Minilab Photo Printer - Manual (Page 125)

Message
code
Message Solution
W-1308 Front cover is closed. Open the front cover according to the instructions on the
screen on the control panel of the printer.
W-2202
W-2204
It is time to reset the ink levels. The ink is low. Fill the ink tank with ink.
Be sure to update the ink levels after refilling the ink.
U “Refilling Ink” on page 51
W-2205 Power Cleaning cannot be completed. There is not enough ink remaining to do Powerful Cleaning,
so cleaning cannot be executed.
Check the printer’s ink tank, and then fill it.
Be sure to update the ink levels after refilling the ink.
U “Refilling Ink” on page 51
W-2208 Ink initialization failed. There is not enough ink remaining to do initial charging, so
initial charging cannot be executed.
Confirm whether the ink tanks for all the colors of ink were
filled.
Repairs are needed if all the colors of ink were filled.
Contact your dealer or Epson Support.
W-2325
W-2326
W-2327
W-2349
Failed to check nozzle clogging. Could not read the check pattern of the Auto Nozzle Check
function.
If necessary, do a nozzle check.
U “Print Head Nozzle Check” on page 60
If you repeat this and the same error occurs, then a sensor
may be malfunctioning.
Contact your dealer or Epson Support.
W-2360
W-2361
W-2362
Nozzle check is recommended. The print head’s auto nozzle check function detected
clogged nozzles.
Check the print results and clean the print head if needed,
and then start printing again.
U “Print Head Nozzle Check” on page 60
W-2401 Maintenance box not installed Install the maintenance box.
U “Replacing the Maintenance Box” on page 53
W-2402 Maintenance box is at the end of its
service life Replace the maintenance box with a new one.
U “Replacing the Maintenance Box” on page 53
W-2403 Maintenance box cannot be recognized Reinstall the maintenance box. If the same error occurs even
after reinstalling the maintenance box, then replace it with a
new one (do not install a faulty maintenance box).
U “Replacing the Maintenance Box” on page 53
W-2405 You cannot use a maintenance box that
has been installed in another printer. Replace the maintenance box with a new one.
U “Replacing the Maintenance Box” on page 53
SL-D500 Series User's Guide
Problem Solver
125