Notes on storage, Notes on printing, Storing and displaying printouts – Epson SureLab D570 Professional Minilab Photo Printer User Manual
Page 18: Notes on handling ink bottles, Notes on how to refill ink
![background image](https://www.manualsdir.com/files/868784/content/doc018.png)
How to riffle
U
“How to Load Paper” on page 25
Notes on storage
❏
Avoid locations that are subject to direct sunlight, excessive heat, or humidity.
❏
Keep the paper in its original package after opening it, and keep the paper flat.
Notes on Printing
Make sure that the leading edge of the paper is perpendicular to the long side and cut completely straight.
Storing and displaying printouts
❏
Do not rub or scratch printouts. If they are rubbed or scratched, the ink may peel off.
❏
Make sure the printouts are completely dry before folding or stacking; otherwise, the color may change where
they touch (leaves a mark). These marks will disappear if they are separated immediately and dried; however,
they will remain if not separated.
❏
Do not use a dryer to dry the printouts.
❏
Avoid locations that are subject to high temperature, humidity, and direct sunlight, and store in a dark place.
❏
Avoid displaying printouts outdoors or in direct sunlight. This may accelerate the fading.
❏
When displaying printouts indoors, we recommend placing them in glass frames and so on. This allows you to
display your printouts for a long time without them fading.
Notes on Handling Ink Bottles
To maintain high quality print results, note the following points for handling ink bottles.
Notes on How to Refill Ink
❏
Use ink bottles dedicated for this printer.
❏
When using the printer, be careful when handling the ink. Ink may splatter when refilling the ink tanks. You
may not be able to clean off ink that splashes onto clothes or belongings.
❏
Do not shake or crush the ink bottles.
❏
To maintain the quality of the printer’s print head, the printer is designed to stop printing before the ink supply
is completely expended, which is why some ink is left in the ink tanks.
❏
To keep the printer in optimum operating condition, we recommend that you do not leave the printer with
only a small amount of ink remaining in the ink tanks.
❏
To get the optimum print results, refill the ink to the upper line in the ink tank at least once each year.
SL-D500 Series User's Guide
Before Use
18