Epson SureLab D570 Professional Minilab Photo Printer - Manual (Page 52)

G
Align the bottle with the ink inlet and insert it,
and then wait until the ink stops by itself at the
upper limit line (a).
By inserting the bottle into the ink inlet for the
correct color, the ink automatically starts filling
and then stops at the upper limit line.
If the ink does not start flowing, reinsert the
bottle.
c Important:
Do not pull out or reinsert the bottle until the
ink has filled to the upper limit. Ink could
leak out.
Do not squeeze the bottle.
H
After the ink has finished filling, remove the
bottle, and then securely tighten the cap of the
ink bottle.
Note:
If any ink remains in the ink bottle, tighten the
cap and store the bottle upright for later use.
I
Securely close the ink tank cap.
Repeat steps 5 to 9 to refill other colors of ink.
J
Securely close the ink tank cover.
K
Return the interior of the printer to its original
position, and then close the front cover.
SL-D500 Series User's Guide
Maintenance
52