Epson SureLab D570 Professional Minilab Photo Printer - Manual (Page 147)

c Important:
The ink inside the ink bottle will freeze if left at below -14 °C (6.8°F) for a long time. If it does freeze, leave it
at room temperature (25 °C [77°F]) for at least two hours until it has defrosted (without condensation).
General Specifications
Temperature Operating: 10 to 35 °C (50 to 95°F)
Storage (before unpacking): -20 to 60 °C (-4 to 140°F) (within 120 hours at 60 °C [140°F], one
month at 40 °C [104°F])
Storage (after unpacking): -20 to 40 °C (-4 to 104°F) (within one month at 40 °C [104°F])
Humidity Operating: 20 to 80% (without condensation)
Storage (before unpacking): 5 to 85% (without condensation)
Storage (after unpacking): 5 to 85% (without condensation)
Weight Main unit: 7.0 kg (15.4 lb.) (ink not included)
Dimensions Main unit: 299 (W) x 350 (D) x 154 (H) mm (11.8 [W] x 13.8 [D] x 6.1 [H] in.)
U “Necessary Space” on page 147
Installed software version E1.1930.0002
Necessary Space
*Space needed to do maintenance
OPEN SOURCE SOFTWARE LICENSE TERMS
This product uses open source software as well as software for which Epson owns the rights.
The entire texts of the license agreements of the open source software are shown below.
SL-D500 Series User's Guide
Appendix
147