Epson SureLab D570 Professional Minilab Photo Printer - Manual (Page 51)

Refilling Ink
Precautions Regarding
Maintenance
Before starting this procedure, be sure to read the
precautions about handling the ink bottles.
U “Notes on Handling Ink Bottles” on page 18
c Important:
❏
Epson recommends the use of genuine Epson
ink bottles.
❏
Do not repeatedly refill with small amounts of
ink. Otherwise, the printer could be damaged.
❏
Do not allow the top of the ink bottle to hit
against any objects after removing its cap;
otherwise ink may spill.
❏
Do not shake the bottles too hard. Ink could
leak out.
❏
Do not leave the bottle inserted into the ink
tank. Doing so could damage the bottle or
cause ink to leak.
How to Refill Ink
A
Check that the power light is lit.
When the power light is flashing, the printer is
operating. Wait until all operations have
stopped.
B
Open the front cover.
C
Place your hand as shown in the illustration,
and pull out the interior of the printer until it
stops.
D
Open the ink tank cover.
Read the precautions for filling ink that are
shown on screen, and then proceed to the next
screen.
E
Open the ink tank cap of the color that you
want to refill.
c Important:
Make sure that the color of the ink tank
matches the ink color that you want to refill.
F
While the ink bottle is standing fully upright,
slowly turn the cap to remove it.
Be careful not to spill any ink.
SL-D500 Series User's Guide
Maintenance
51