Epson SureLab D570 Professional Minilab Photo Printer - Manual (Page 70)

Item Functions
D Periodic Check Set the time to execute auto nozzle check according to the number of sheets
printed.
If the number of sheets being printed for a single job exceeds the number of
printed sheets set for this item, then the number of sheets for that job is printed,
after which auto nozzle check is executed.
E Nozzle Compensation Set the print quality for when normal nozzles compensate for the ink that could
not be ejected by clogged nozzles.
F Auto Cleaning Sets the number of times to do auto cleaning when clogged nozzles are detected.
G Action when printing trouble is
detected You can set this when High quality is selected in Auto Nozzle Check Settings
( B ).
Sets whether to stop printing when clogged nozzles are detected.
When set to Stop Immediately , printing is stopped when clogged nozzles are
detected.
When set to Ignore , printing is continued even if clogged nozzles are detected.
H Set button Clicking this reflects the changes to each item B to G .
Paper Settings tab
The configuration and functions of the Paper Settings tab in the Printer settings screen are shown below.
Item Functions
A Paper Source Usually Cassette is displayed.
B Paper Type Shows the type of paper loaded in the printer selected in the printer list area at
the top of the screen.
C Print Head Alignment Corrects print head misalignments when printing.
See the following for details on Print Head Alignment.
U “Print Head Alignment Method” on page 76
D Paper Feed Adjustment Adjusts the amount of paper feed.
See the following for details on Paper Feed Adjustment.
U “Paper Feed Adjustment Method” on page 76
SL-D500 Series User's Guide
Using the Maintenance Tool (Windows)
70