Epson SureLab D570 Professional Minilab Photo Printer - Manual (Page 110)

Related information
U “Selecting Wi-Fi Settings by Entering the SSID
and Password” on page 110
U “Selecting Wi-Fi Settings by Push Button Setup”
on page 110
U “Selecting Wi-Fi Settings by PIN Code Setup
(WPS)” on page 112
Selecting Wi-Fi Settings by
Entering the SSID and Password
You can set up a Wi-Fi network by entering the
information necessary to connect to a wireless router
from the printer’s control panel. To set up using this
method, you need the SSID and password for a
wireless router.
Note:
If you are using a wireless router with its default
settings, the SSID and password are on the label. If you
do not know the SSID and password, contact the person
who set up the wireless router, or see the documentation
provided with the wireless router.
A
Select Wi-Fi Setup on the home screen.
To select an item, move the focus to the item
using the
u / d / l / r buttons, and then press the
Z button.
B
Select Wi-Fi (Recommended) .
C
Press the Z button to proceed.
D
Select Wi-Fi Setup Wizard .
E
Select the SSID for the wireless LAN router
(access point) from the printer’s control panel,
and then press the
Z button.
Note:
❏ If the SSID you want to connect to is not
displayed on the printer’s control panel, select
Search Again to update the list. If it is still
not displayed, select Other SSIDs , and then
enter the SSID directly.
❏
If you do not know the SSID, check if it is
written on the label of the wireless router. If
you are using the wireless router with its
default settings, use the SSID written on the
label.
F
Enter the password.
Select whether or not you print a network
connection report after finishing the settings.
Note:
❏
The password is case-sensitive.
❏
If you do not know the password check if the
information is written on the label of the
wireless router. If you are using the wireless
router with its default settings, use the
password on the label. If you cannot find any
information, see the documentation provided
with the wireless router.
G
If connection is complete, print a network
connection diagnosis report if needed, and then
finish.
Related information
U “Text Input Screen” on page 15
U “Printing a Network Connection Report” on
page 112
Selecting Wi-Fi Settings by
Push Button Setup
You can automatically set up a Wi-Fi network by
pressing a button on the wireless router. If the
following conditions are met, you can set up by using
this method.
SL-D500 Series User's Guide
Wireless LAN Connection
110