Enterasys Networks 6000 - Manual (Page 99)

The Device View
2-80 Managing the Module
VLAN ID
Unique identifier for the VLAN.
Name
Name assigned to the VLAN.
Port Egress Information
The Port Egress Information box lists the ports whose egress lists contain the selected
VLAN. You can use this list to change how frames belonging to the selected VLAN will
be forwarded out a port.
Index
Sequence number identifying the port.
Current
Displays how frames belonging to the selected VLAN are currently forwarded out the
port: No Egress (frames will not be transmitted), Tagged (frames will be transmitted as
tagged), or Untagged (frames will be transmitted as untagged).
Desired
Displays how frames belonging to the selected VLAN will be forwarded out the port: No
Egress (frames will not be transmitted), Tagged (frames will be transmitted as tagged), or
Untagged (frames will be transmitted as untagged).
The Status bar at the bottom of the window indicates the operation currently taking place
in the window.
Building an Egress List
To build egress lists for your 802.1Q switch:
1. In the list box at the top of the VLAN Egress Port Configuration window, click
to select a VLAN. The ports that contain this VLAN in their egress lists are
displayed in the lower portion of the window.
2. To set the egress type for one port: In the Port Egress Information list,
right-click the desired port, and select how the frames are to be transmitted:
No Egress (frames will not be transmitted), Tagged (frames will be transmitted
as tagged), or Untagged (frames will be transmitted as untagged).
To set the egress type for all ports: In the Port Egress Information list,
right-click any port, and select All No Egress (frames will not be transmitted),
All Tagged (frames will be transmitted as tagged) or All Untagged (frames will
be transmitted as untagged).
3. Click Apply to set the change(s).
4. Repeat for another VLAN, if desired.