Enterasys Networks 6000 - Manual (Page 182)

Alarm Limits 5-19
Managing Ethernet MicroLAN Modules
To access the board-level Alarm Limits window:
1. Click on the appropriate Module Index to display the Module menu.
2. Drag down to select the appropriate repeater channel (A - H), then right to
reveal the board-level Repeater menu.
3. Select Alarm Limits. The Board Alarm Limits window, Figure 5-7 , will appear.
Figure 5-7. The Board Alarm Limits Window
To access the port-level Alarm Limits window:
1. Click once on the appropriate Port to display the port menu.
2. Select Alarm Limits. The Port Alarm Limits window, Figure 5-8 , will appear.
When using the Alarm Limits screens to set your alarm thresholds, keep in mind that
repeater-level thresholds will apply to all traffic received by the selected repeater channel;
board-level thresholds will apply only to traffic on the selected board; and port-level
thresholds will apply to traffic on the specific port.