Enterasys Networks 6000 - Manual (Page 204)

Viewing FDDI Information 6-13
FDDI Management
Figure 6-6. The FDDI Statistics Window
The FDDI Statistics window displays the following information for the module:
SMT#
This field displays the index number of Station Management (SMT) entity for the
HSIM-F6.
Frames/sec
The number of frames/second (averaged over the specified poll interval) transmitted by
the indicated SMT.
KBytes/sec
The number of kilobytes/second (averaged over the specified poll interval) transmitted by
the indicated SMT.
Peak KBytes/sec
The peak number of kilobytes/second transmitted by the indicated SMT, as detected over
all polling intervals since monitoring began (i.e., since the FDDI Statistics window was
first opened).
%Util
The percentage of utilization of available bandwidth by the indicated SMT over the
current poll interval; the percentage is calculated by dividing the actual number of
transmitted bytes/sec into the maximum number of bytes/sec that could be transmitted
(125,000,000 bytes/sec potential on a 100 Megabit/second ring).