Station list, Station list -9 – Enterasys Networks 6000 User Manual
Page 200
Viewing FDDI Information
6-9
FDDI Management
Station List
The Station List illustrates the configuration of the ring associated with the currently
selected SMT entity, including number of nodes on the ring, node addresses (both
Canonical and MAC), node class, and ring topology.
Figure 6-4. The Station List Window
The Station List provides the following information about the ring with which the SMT is
currently associated:
Number of Nodes
The number of stations inserted into the FDDI ring with which the SMT entity is currently
associated.
Address Mode
Displays the current mode being used to display the addresses of the devices in the Station
List. The two possible modes are Canonical (FDDI) or MAC (Ethernet).
To change the current Address Mode, click on the Address Mode button at the bottom of
the window. The current address mode will change in the Address Mode field and the
Stations panel.