Enterasys Networks 6000 - Manual (Page 106)

Managing the Module 2-87
The Device View
Configuring Basic VLAN Port Parameters
VLAN port assignment and egress state configuration is performed using the VLAN Port
Configuration (Basic) window, which is accessed from the Bridge Extension window. You
can also use this window to access Advanced VLAN Port parameters using the Advanced
button at the bottom of the window. To launch the window:
1. In the Device View, select Bridge Extension Configuration... from the Device
menu.
2. In the Bridge Extension Configuration window, click on the VLAN button and
select VLAN Port Configuration... from the menu. The VLAN Port
Configuration (Basic) window,
Figure 2-26 , appears:
Figure 2-30. The VLAN Port Configuration (Basic) Window
The window displays the following information:
Port
Displays the number that identifies the port.