Enterasys Networks 6000 - Manual (Page 213)

ATM Configuration
7-2 Accessing the ATM Connections Window
Figure 7-1. The Current ATM Connections Window
The Current ATM Connections window provides the following information about the
device’s ATM connections:
Connection Data
The Connection Data fields provide the following information about each ATM interface
available on the device:
I/F Displays the index number assigned to each HSIM-A6DP
interface installed in a SmartSwitch 6000 or Matrix E7
module.
Maximum Connections Displays the maximum number of connections allowed by
current device firmware.
Current Configured Displays the number of Permanent Virtual Circuits, or PVCs,
currently configured.