Enterasys Networks 6000 - Manual (Page 223)

HSIM-W87 Configuration
8-6 Configuring IP Priority
Configuring IP Priority
The IP Priority Configuration window allows you to assign priority transmission to up to
16 IP addresses communicating across the HSIM-W87. To access the IP Priority Config
window:
1. Click on the appropriate Module Index to access the Module menu.
2. Select IP Priority Config. The IP Priority Config window, Figure 8-3 , will
appear.
Figure 8-3. The IP Priority Config Window
In the IP Priority Config window there several fields and a list box displaying the current
IP addresses that have been configured for priority transmission.
The following information is provided in the window:
Max Entries
This is a read-only field that displays the maximum number (16) of Priority IP addresses
that can be configured.