Configuring traffic classes, gmrp, and gvrp, Setting vlan parameters and operational modes, Setting vlan parameters and operational modes -84 – Enterasys Networks 6000 User Manual
Page 103
The Device View
2-84
Managing the Module
Configuring Traffic Classes, GMRP, and GVRP
In the Bridge Configuration window, you can enable or disable Traffic Classes, GMRP
and GVRP (if supported) at the device-level:
1.
Use the drop-down list in the Traffic Classes Desired field and select Enable
or Disable.
2.
Use the drop-down list in the GMRP Desired field and select Enable or
Disable.
3.
Use the drop-down list in the GVRP Desired field and select Enable or
Disable.
4.
Click on the Apply button to set the changes, or the Cancel button to close
the Bridge Extension Configuration window without incorporating any
changes.
Setting VLAN Parameters and Operational Modes
The VLAN Configuration window allows you to view, create, modify, delete, enable, and
disable VLANs on the module. To launch the window:
1.
In the Device View, select Bridge Extension Configuration... from the
Device menu.
2.
In the Bridge Extension Configuration window, click on the VLAN button and
select VLAN Configuration... from the menu. The VLAN Configuration
window,
, appears.