Enterasys Networks 6000 - Manual (Page 219)

HSIM-W87 Configuration
8-2 The T3 Configuration Window
Figure 8-1. The T3 Config Window
The T3 Config window provides the following information about the device’s T3
configuration and allows you to set certain values:
Time Elapsed
Indicates the number of seconds that have elapsed since the beginning of the near end
current error-measurement period. To update this field you must close and reopen the
window.
Valid Intervals
Displays the number of previous near end intervals for which valid data was collected.
The value will be 96 unless the interface was brought online within the last 24 hours, in
which case the value will be the number of complete 15-minute near end intervals since
the interface has been online.
NOTE
For some firmware versions, the Valid Intervals field may display an incorrect value.
Click here to select or
deselect an option
button.