Enterasys Networks 6000 User Manual
Page 12
1-3
Introduction
-
The HSIM-W87 is a Wide Area Network (WAN) HSIM that provides LAN to
WAN connectivity for any SmartSwitch that supports high-speed interface
modules (HSIMs). The HSIM-W87 has a DS3 interface (T3), providing up to 28
separate DS1 connections (T1). Refer to Chapter 8,
,
for information on configuring an HSIM-W87.
-
The HSIM-G01 and HSIM-G09 are Gigabit Ethernet HSIMs, each of which
provide a single Gigabit Ethernet connection that fully conforms to the IEEE
P802.3z (D3.1) Draft Standard. The HSIM-G01 provides a single 1000Base-SX
(short-wave) multimode fiber optic SC interface, allowing for link distances of up
to 500 meters. The HSIM-G09 provides a single 1000Base-LX (long-wave)
single mode/multimode fiber optic SC interface, allowing for link distances of up
to 3 kilometers.
-
The HSIM-SSA710/20 are Wide Area Networking (WAN) HSIMs that support
up to two ISDN PRI interfaces with up to 24 V.90 56K modem connections.
The HSIM-SSA710/20 are intelligent devices that are managed as individual
devices rather than as part of the device in which they are installed. Before you
can access the device, you must add it to your central node database by inserting
it in an existing List, Tree, or Map View, or by doing a Discover process (refer to
your User’s Guide for more information). Once it has been added to your List,
Tree, or Map view, you can access and manage the HSIM according to the
information in Chapter 2,
.
•
The 6E128-26 and 6E129-26 SmartSwitch modules each provide 24 fixed Ethernet
fiber ports (multi-mode fiber on the 6E128; single-mode fiber on the 6E129) via ST
connectors, plus two slots for FEPIMs.
•
The 6E138-25 and 6E139-25 SmartSwitch modules each provide 24 fixed Ethernet
fiber ports (multi-mode fiber on the 6E138; single-mode fiber for the 6E139) via ST
connectors, plus a single slot for an HSIM.
•
The 6E123-50 and 6E133-49 SmartSwitch modules are 48 port MicroLAN Ethernet
modules (4 MicroLANs of 12 ports each, via four RJ21 Telco connectors). The
6E123-50 provides two FEPIM slots, while the 6E133-49 provides a single HSIM slot.
•
The 6E233-49 SmartSwitch module provides 48 Ethernet ports via four RJ21
interfaces and one HSIM slot which can accept any of the previously detailed HSIMs.
•
The 6G306-06 is a third-generation Matrix E7 and SmartSwitch 6000 module which
provides six Gigabit Ethernet ports via flexible GPIM uplink modules.
NOTE
The HSIM-W6 and HSIM-W84 are intelligent devices that are functionally identical to the
CSX400. These HSIMs require their own IP addresses, and are managed as individual
devices rather than as part of the device in which they are installed. Refer to the CSX200
and CSX400 User’s Guide for details on managing these devices using NetSight Element
Manager.