Charging the battery pack using a charger – Sony PCM-A10 High-Resolution Audio Recorder User Manual
Page 76

Interchangeable Lens Digital Camera
ILCE-7RM5
α7RV
Charging the battery pack using a charger
Insert the battery pack into the battery charger.
Place the battery pack on the battery charger aligning the direction of
(triangle) mark.
Slide the battery pack to the end.
1
Connect the power cord (supplied) to the battery charger, and connect the battery charger to the wall outlet
(wall socket).
When charging starts, the CHARGE lamp
(A)
lights up in orange.
You can check the approximate charging status with the charging status indicator lamp
(B)
as shown in the
following table. (The orange color indicates the lighting of the lamp.)
When the CHARGE lamp and charging status indicator lamp light up and then immediately turn off, the battery
pack is fully charged.
2
Charging status
CHARGE lamp/Charging status indicator lamp
Immediately after attaching the battery pack - 30%
30% - 60%
60% - 90%
90% - Fully charged
Full charging completed
76
76
- UWP-D22 Camera-Mount Wireless Cardioid Handheld Microphone System (UC14: 470 to 542 MHz) 16mm Fisheye Conversion Lens for FE 28mm f/2 Lens UTX-P40 Wireless Plug-On Transmitter (UC25: 536 to 608 MHz) ZV-E1 Mirrorless Camera (White) ZV-E10 Mirrorless Camera (Black) LBN-H1 Airpeak Battery Station VCL-ECF2 Fisheye Converter For SEL16F28 and SEL20F28