Sony PCM-A10 High-Resolution Audio Recorder - Manual (Page 418)

Help Guide
Interchangeable Lens Digital Camera
ILCE-7RM5 α7RV
WPS Push
If your access point has a Wi-Fi Protected Setup (WPS) button, you can register the access point to this product easily.
For details about the available functions and settings of your access point, see the access point operating instructions or
contact the administrator of the access point.
Note
[WPS Push] works only if the security setting of your access point is set to WPA or WPA2 and your access point supports the Wi-
Fi Protected Setup (WPS) button method. If the security setting is WEP or WPA3 only or your access point does not support the
Wi-Fi Protected Setup (WPS) button method, perform [Access Point Set.].
A connection may not be possible or the communication distance may be shorter depending on the surrounding conditions, such
as the type of wall material and the presence of obstructions or radio waves between the product and access point. In this case,
change the location of the product or move the product closer to the access point.
Related Topic
Access Point Set.
5-044-866-11(1) Copyright 2022 Sony Corporation
MENU → (Network) → [Wi-Fi] → [WPS Push]. 1
Push the Wi-Fi Protected Setup (WPS) button on the access point to connect. 2
418 418