Sony PCM-A10 High-Resolution Audio Recorder - Manual (Page 125)

Back-lit subjects
Continuously repetitive patterns, such as the facades of buildings
Subjects in the focusing area with different focal distances
To always enable manual focusing operations when shooting still images
If you set [Full Time DMF] to [On], you can perform manual focusing operations regardless of the [ Focus Mode]
setting.
You can use both the auto and manual focus without changing the [
Focus Mode] setting.
Hint
In [Continuous AF] mode, you can lock the focus by pressing and holding the button that has been assigned the [Focus Hold]
function.
When you set the focus to infinity in [Manual Focus] mode or [DMF] mode, make sure that the focus is on a sufficiently distant
subject by checking the monitor or the viewfinder.
Note
[Automatic AF] is available only when you are using a lens that supports phase detection AF.
When [Continuous AF] or [Automatic AF] is set, the angle of view may change little by little while focusing. This does not affect
the actual recorded images.
Only [Continuous AF] and [Manual Focus] are available when shooting movies or when the Still/Movie/S&Q dial is set to
(Movie) or S&Q (S&Q Motion).
Related Topic
Direct manual focus (DMF)
Manual Focus
Selecting the focus area (Focus Area)
Assigning frequently used functions to buttons and dials (Custom Key/Dial Set.)
5-044-866-11(1) Copyright 2022 Sony Corporation
125 125