ProSoft Technology 5204SE-MNET-PDPMV1 - Manual (Page 8)

5204SE-MNET-PDPMV1 ♦ ProLinx Gateway Scope
Modbus TCP/IP to PROFIBUS DP-V1 Pass-Through Master User Manual
Page 8 of 235
ProSoft Technology, Inc.
December 22, 2009
1.3 System Requirements
The application described in this User Manual requires the following minimum
hardware and software components:
ƒ Schneider Electric Telemecanique Modicon PAC system with either:
o Built-in Modbus TCP/IP Ethernet communication port
or
o BMXNOE0100 Ethernet Network Module (NOE)
ƒ Schneider Electric Telemecanique Unity Pro programming software, version
4.0 or higher
ƒ ProSoft Configuration Builder (PCB) software, version 2.1. 9.1 or higher (on
the ProLinx Solutions CD-ROM, or can be downloaded from the web site)
ƒ Supported operating systems and PC hardware required:
o
Microsoft Windows VISTA Business Edition 32
Pentium IV, 2.4 GHz processor minimum, 3 GHz recommended
1 GB of RAM minimum, 3 GB recommended
8 GB of hard drive space minimum, 20 GB recommended
o
Microsoft Windows XP Professional with Service Pack 1 or 2
Pentium IV, 1.5 GHz processor minimum, 3 GHz recommended
512 MB of RAM minimum, 1 GB recommended
4GB of hard drive space minimum, 8 GB recommended
ƒ VGA or SVGA graphics adapter, 800 x 600 minimum resolution, 24-bit color
resolution (True Color)
ƒ CD-ROM drive, Windows Mouse and Keyboard
ƒ PC with DB9Male RS-232 Serial Port (for full diagnostics using PCB), USB
port (for Unity Pro), and Ethernet port (for configuration and PROFIBUS
diagnostics using PCB and for Unity Pro)
ƒ 24 vdc power supply (not provided) with at least 500 mA current capacity
available to power the gateway