ProSoft Technology 5204SE-MNET-PDPMV1 - Manual (Page 57)

Procedures 5204SE-MNET-PDPMV1 ♦ ProLinx Gateway
User Manual Modbus TCP/IP to PROFIBUS DP-V1 Pass-Through Master
ProSoft Technology, Inc.
Page 57 of 235
December 22, 2009
3 In the Project Browser, double-click C ONFIGURATION to open the PLC Bus
window.
Notice that the image in the window shows the processor in the second
position in the rack (the first position is for the power supply.)
4 For this example, you will populate the rack with a combination of modules
that represent all the possible Modbus data types:
o
Coil bits
o Input Status Bits
o Input Registers
o Holding Registers.