ProSoft Technology 5204SE-MNET-PDPMV1 - Manual (Page 200)

5204SE-MNET-PDPMV1 ♦ ProLinx Gateway Reference
Modbus TCP/IP to PROFIBUS DP-V1 Pass-Through Master User Manual
Page 200 of 235
ProSoft Technology, Inc.
December 22, 2009
4.6.4 Get Slave Configuration Message Structure
Parameter Description
Command Initiator Application
Command Name FB_APPL_GET_SLAVE_CONFIG
Command Number 0005h
Fragmented No
Extended Header Data Fault information may be returned in the header of the response.
Command and Response Layout: Get Slave Configuration
Command Response
Message ID (ID) (ID)
Acyclic Message Status
Word
4002h 0002h
Command 0005h 0005h Get Slave Configuration
Data size 0000h (Size of data) Number of identifier bytes
(n)
Frame count 0001h 0001h
Frame number 0001h 0001h
Offset high 0000h 0000h
Offset low 0000h 0000h
Extended word 1 Slave
Address
- Slave
Address
-
Extended word 2 - -
Extended word 3 - -
Extended word 4 - -
Extended word 5 - Error Code 1 Error Code 2
Extended word 6 - Error Code 3 Error Code 4
Extended word 7 - Return Code
Extended word 8 - Fault Information
Identifier byte 1 Response data word 1
Identifier byte 2 Response data word 2
Identifier byte 3 Response data word 3
... ...
Identifier byte n Response data word n
Acyclic Message Status Word
Refer to Acyclic Message Status Word (page 218).
Slave Address
Range 0 to 125, specifies the slave from which to read the configuration.