ProSoft Technology 5204SE-MNET-PDPMV1 User Manual
Page 25
Procedures 5204SE-MNET-PDPMV1
♦ ProLinx Gateway
User Manual
Modbus TCP/IP to PROFIBUS DP-V1 Pass-Through Master
ProSoft Technology, Inc.
Page 25 of 235
December 22, 2009
5 Double-click the P
RO
S
OFT
M
ASTER
icon in the Bus Configuration window.
This action opens the Master Properties dialog box.
Configure the PROFIBUS Slaves
Important: The GSD file for this example is not included on the ProLinx Solutions CD-ROM, and is
used for illustrative purposes only. You can download a variety of example GSD files from the
PROFIBUS Trade Organization web site at www.profibus.org, or from the manufacturer's web site
for your PROFIBUS slaves.
The following steps, describe how to add and configure a Siemens EM 277 I/O
chassis to the PROFIBUS network. The configuration information (.GSD file) for
this device must be installed according to the procedure found in Install the GSD
Files (page 23). Most other PROFIBUS Slaves can be configured in a similar
manner.
1 In ProSoft Configuration Builder for PROFIBUS, click the plus sign [+] to
expand the PROFIBUS
DP
tree.