ProSoft Technology 5204SE-MNET-PDPMV1 User Manual
Page 68
5204SE-MNET-PDPMV1 ♦ ProLinx Gateway
Procedures
Modbus TCP/IP to PROFIBUS DP-V1 Pass-Through Master
User Manual
Page 68 of 235
ProSoft Technology, Inc.
December 22, 2009
3.6.5 Build the M340 Project
Whenever you update the configuration of your gateway, the PROFIBUS
network, or the processor, you must import the changed configuration from
ProSoft Configuration Builder (PCB) and then build (compile) the project before
downloading it to the processor.
Note: The following steps show you how to build the project in Unity Pro. This is not intended to
provide detailed information on using Unity Pro, or debugging your programs. Refer to the
documentation for your processor and for Unity Pro for specialized information.
To build (compile) the project:
1 Review the elements of the project in the Project Browser.
2 Make sure you have configured sufficient %MW memory space for your
entire project and PROFIBUS data.
3 To avoid build errors, you will need to enable the D
YNAMIC
A
RRAY
L
ANGUAGE
E
XTENSION
option. From the Unity Pro menu bar, select T
OOLS
, and then
choose P
ROJECT
S
ETTINGS
.