ProSoft Technology 5204SE-MNET-PDPMV1 - Manual (Page 19)

Procedures 5204SE-MNET-PDPMV1 ♦ ProLinx Gateway
User Manual Modbus TCP/IP to PROFIBUS DP-V1 Pass-Through Master
ProSoft Technology, Inc.
Page 19 of 235
December 22, 2009
3.2.3 Set Up the Project - SE-MNET-PDPMV1
To begin, start ProSoft Configuration Builder. If you have used other Windows
configuration tools before, you will find the screen layout familiar. ProSoft
Configuration Builder’s window consists of a tree view on the left, an information
pane, and a configuration pane on the right side of the window. When you first
start ProSoft Configuration Builder, the tree view consists of folders for Default
Project and Default Location, with a Default Module in the Default Location
folder. The following illustration shows the ProSoft Configuration Builder window
with a new project.
Your first task is to add the 5204SE-MNET-PDPMV1 module to the project.
1 Use the mouse to select D EFAULT M ODULE in the tree view, and then click the
right mouse button to open a shortcut menu.