ProSoft Technology 5204-DFNT-PDPMV1 - Manual (Page 79)

PDPMV1 ♦ ProLinx Gateway Mailbox Messaging
PROFIBUS DPV1 Master Protocol Manual
ProSoft Technology, Inc. Page 79 of 157
March 23, 2011
Command and Response Layout: Set Operating Mode
Command Response
Message ID (ID) (ID)
Acyclic Message Status
Word
4002h 0002h
Command 0002h 0002h Set Operation Mode
Data size 0000h 0000h
Frame count 0001h 0001h
Frame number 0001h 0001h
Offset high 0000h 0000h
Offset low 0000h 0000h
Extended word 1 Mode Conf. Req Mode Conf. Req
Extended word 2 - -
Extended word 3 - -
Extended word 4 - -
Extended word 5 - -
Extended word 6 - -
Extended word 7 - Appl. Specific Error Code
Extended word 8 - Fault Information
Mode
40h: STOP
80h: CLEAR
C0h: OPERATE
Conf. Req.
00h: Confirmation is not required
01h: Confirmation required. All confirmations are automatically sent by the
Master; the user is not required to send a confirmation message.
Fault Information
If "Invalid Other" is returned in the Acyclic Message Status Word in the header of
the response, information about the fault can be found here. Refer to Return
Codes (page 100) for more information.
0100h: Invalid operating mode
FF00h: Module not initialized