ProSoft Technology 5204-DFNT-PDPMV1 User Manual
Page 27
PDPMV1 ♦ ProLinx Gateway
Configuration
PROFIBUS DPV1 Master
Protocol Manual
ProSoft Technology, Inc.
Page 27 of 157
March 23, 2011
2.2.5 Input Byte Swap
Y
ES
or N
O
This parameter determines if the bytes in the PROFIBUS Input Data area are
swapped before being stored in the gateway memory database. If the parameter
is set to N
O
, no swapping will be applied. If the parameter is set to Y
ES
, the order
of bytes in each word will be swapped before being stored in memory.
Example:
With Input Byte Swap set to N
O
, incoming order is unchanged - ABCDEF
With Input Byte Swap set to Y
ES
, each byte pair is swapped - BADCFE
2.2.6 Output Byte Swap
Y
ES
or N
O
This parameter determines if the bytes in the PROFIBUS Output Data area are
swapped before being transmitted to slaves on the PROFIBUS network. If the
parameter is set to N
O
, no swapping will be applied. If the parameter is set to
Y
ES
, the order of bytes in each word will be swapped before being transmitted.
Example:
With Output Byte Swap set to N
O
, outgoing output order is unchanged -
ABCDEF
With Output Byte Swap set to Y
ES
, each output byte pair is swapped -
BADCFE