ProSoft Technology 5204-DFNT-PDPMV1 - Manual (Page 30)

Configuration PDPMV1 ♦ ProLinx Gateway
Protocol Manual PROFIBUS DPV1 Master
Page 30 of 157 ProSoft Technology, Inc.
March 23, 2011
2.2.14 Watchdog Timeout
Sets the period of time (in 0.1s increments) for the gateway to wait for
communication loss detection. For example, set this parameter to 100 to set a
waiting period of 10 seconds. To disable this function, set this parameter to a
value of -1.
2.2.15 Watchdog Reset Value
Sets the value that will be sent to the PROFIBUS output byte registers upon
communication loss as detected by the Watchdog function. To disable this
function, set this parameter to a value of -1.