ProSoft Technology 5204-DFNT-PDPMV1 - Manual (Page 131)

PDPMV1 ♦ ProLinx Gateway Reference
PROFIBUS DPV1 Master Protocol Manual
ProSoft Technology, Inc. Page 131 of 157
March 23, 2011
The CIPconnect Path Editor allows the configuration of the path between
your PC and the MVI56-PDPMV1 or MVI69-PDPMV1 module.
For the following example, the PC will be connected through Ethernet to a
1756-ENBT communication card (IP=192.168.0.100) and the MVI56-
PDPMV1 card is located in slot 3 of the same rack.
For more information, please refer to Using the CIPconnect Path Editor.
Note: CIPconnect is available for MVI56-PDPMV1 firmware version 1.28.000 (or later) and for
MVI69-PDPMV1 firmware version 1.37.002 (or later). This functionality requires comDTM version
1.0.1.5 with install version 1.01.0003 (or later). For information on how to check the comDTM
version and install version, refer to Verifying the comDTM Version and comDTM Install Version
(page 133).
4 When you have configured the communication path, click the OK button to
confirm. The communication path will be displayed at the top grid panel as
shown in the following illustration.