ProSoft Technology 5204-DFNT-PDPMV1 - Manual (Page 20)

Configuration PDPMV1 ♦ ProLinx Gateway
Protocol Manual PROFIBUS DPV1 Master
Page 20 of 157 ProSoft Technology, Inc.
March 23, 2011
Adding a Module
Begin the process of creating your custom application configuration by selecting
the module type of your ProLinx gateway.
1 Double-click the D
EFAULT M ODULE icon to open the Choose Module Type
dialog box.
2 In the Choose Module Type dialog box, select the M ODULE type.
Or
1 Open the
P ROJECT menu and choose L OCATION .
2 On the L OCATION menu, choose A DD M ODULE .
To add a module to a different location
1 Right-click the L OCATION folder and choose A DD M ODULE . A new Module icon
appears.
Or
1 Select the L
OCATION icon.
2 From the P ROJECT menu, select L OCATION , and then select A DD M ODULE .