ProSoft Technology MVI71-DNP - Manual (Page 51)

Installing and Configuring the Module MVI71-DNP ♦ PLC Platform
DNP 3.0 Master/Slave Communication Module
ProSoft Technology, Inc. Page 51 of 172
August 23, 2007
3 Press [Y]. The module will automatically start a Zmodem file transfer. The
configuration file will be stored in the default file transfer folder on your PC.
ƒ Note: ProSoft Technology suggests that you download the configuration file pre-
loaded on your module. However, configuration files are also available on the
ProSoft CD as well as the ProSoft Technology web site at
http://www.prosoft-
technology.com .
When the configuration file has been transferred to your PC, the dialog box
will indicate that the transfer is complete.
The configuration file is now in a folder on your PC. To view the location of
this folder, open the Transfer menu in Hyperterminal and choose Receive
File.
4 You can now open and edit the file in a text editor such as Notepad. When
you have finished editing the file, save it and close Notepad.