ProSoft Technology MVI71-DNP - Manual (Page 16)

MVI71-DNP ♦ PLC Platform Start Here
DNP 3.0 Master/Slave Communication Module
Page 16 of 172 ProSoft Technology, Inc.
August 23, 2007
1.6 Download the Sample Program to the Processor
¾ To download the sample program from RSLogix 5 to the PLC
processor:
Note: The key switch on the front of the PLC processor must be in the REM position.
1 If you are not already online to the processor, open the Communications
menu, and then choose Download. RSLogix will establish communication
with the processor.
2 Click the Download button to transfer the sample program to the processor.
3 When prompted, choose Computer to PLC
4 RSLogix will compile the program and transfer it to the processor. This
process may take a few minutes.