ProSoft Technology MVI71-DNP - Manual (Page 129)

Reference MVI71-DNP ♦ PLC Platform
DNP 3.0 Master/Slave Communication Module
ProSoft Technology, Inc. Page 129 of 172
August 23, 2007
[Section]/Item Description
[DNP Slave Analog Inputs] DNP database analog input override values
START
# This area is to override the class and deadband assignment for analog input database points. Enter
list of points
# between the START and END
labels.
#
# Point# Class Deadband
START
END
[Section]/Item Description
[DNP Slave Float Inputs] DNP database floating-point input override
values
# This area is to override the class and deadband assignment for float input database points. Enter
list of points
# between the START and END
labels.
#
# Point# Class Deadband
START
END
[Section]/Item Value Range Description
[Secondary Port] Definitions for secondary port on module
Type: M or S or
blank This parameter defines the functionality of the
secondary port on the module.
M = emulate a DNP master port
S = back-up DNP slave port to the primary
port.
Any other value will disable the port.
Baud Rate: Baud rate
value Secondary DNP Port Baud Rate: 300, 600,
1200, 2400, 4800, 9600, 19200, 384 (38400)
, 576 (57600), 115 (115200)
RTS On: 0 to 65535
milliseconds This value represents the number of 1 ms
increments to be inserted between asserting
the RTS modem line and the actual
transmission of the data.
RTS Off: 0 to 65535
milliseconds This value represents the number of 1 ms
increments to be inserted after the last
character of data is transmitted before the
RTS modem line is dropped.