PLANET WGSW-48040HP - Manual (Page 71)

Command Guide of WGSW-48040HP
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list logging
4.2.45.4 access-list policy
Command:
access-list policy
policy Policy
Policy ID
Default:
Policy ID: 0
Usage Guide:
To configure Policy ID for the ACL.
Example:
To configure ACL Policy ID 1 for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list policy 1
4.2.45.5 access-list port-state
Command:
access-list port-state
port-state Re-enable shutdown port that was shutdown by access-list module
Default:
Enable
Usage Guide:
To enable Port-state function for the ACL.
Example:
To configure ACL Port-state function for the GigabitEthernet X/X.
Switch# configure terminal
-71-