PLANET WGSW-48040HP - Manual (Page 190)

Command Guide of WGSW-48040HP
4.2.77 ipv6 mld snooping
Command:
ipv6 mld snooping
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
Default:
Disabled
Usage Guide:
To enable MLD Snooping.
Example:
To enable MLD Snooping.
Switch# configure terminal
Switch (config)# ipv6 mld snooping
4.2.78 ipv6 mld snooping vlan
Command:
ipv6 mld snooping vlan
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
vlan MLD VLAN
VLAN identifier(s): VID
Default:
Disabled
Usage Guide:
To enable MLD Snooping for specific VLAN.
Example:
To enable MLD Snooping for VLAN 1.
Switch# configure terminal
Switch (config)# ipv6 mld snooping vlan 1
-190-