PLANET WGSW-48040HP - Manual (Page 103)

Command Guide of WGSW-48040HP
Usage Guide:
To enable SSM of SyncE for specific interface
Example:
To enable SSM of SyncE for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # network-clock synchronization ssm
4.2.45.66 no
Command:
no
no Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function for specific interface
Example:
To enable the function (network-clock synchronization ssm) for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # no network-clock synchronization ssm
4.2.45.67 ping ip
Command:
ping ip size
ping The ping command allows you to test connectivity to a network host from the appliance
ip ip
IP address
size size
Default is 56 (excluding MAC, IP and ICMP headers)
-103-