PLANET WGSW-48040HP - Manual (Page 349)

Command Guide of WGSW-48040HP
Switch # show platform phy status interface GigabitEthernet 1/1
Port Issues seen during 1G PHY warmstart Issues during 10G PHY WS
---- ----------------------------------- ------------------------
1 No No
4.20.73 show port-security port
Command:
show port-security port [ interface ( [ ] ) ]
show Show running system information
port-security port-security
port Show MAC Addresses learned by Port Security
interface Search by port
Default:
N/A
Usage Guide:
To display the MAC Addresses of Port Security.
Example:
To display the MAC Addresses of Port Security.
Switch # show port-security port interface GigabitEthernet 1/1
GigabitEthernet 1/1
-------------------
MAC Address VID State Added Age/Hold Time
----------------- ---- ---------- ------------------------- -------------
4.20.74 show port-security switch
Command:
show port-security switch [ interface ( [ ] ) ]
show Show running system information
port-security port-security
switch Show Port Security status
-349-