PLANET WGSW-48040HP - Manual (Page 50)

Command Guide of WGSW-48040HP
Switch# configure terminal
Switch (config)# aaa authentication login telnet local radius
4.2.12 aaa authentication login telnet tacacs
Command:
aaa authentication login telnet tacacs
Default:
telnet : local
Usage Guide:
To authenticate the tacacs account via telnet only.
Example:
To authenticate the local and radius and tacacs account via telnet.
Switch# configure terminal
Switch (config)# aaa authentication login telnet local radius tacacs
4.2.13 access management
Command:
access management
ipv4_addr | ipv6_addr> all | snmp | telnet | to | Web
ID of access management entry
The VLAN ID for the access management entry
Start IPv4 address
Start IPv6 address
all All services
snmp SNMP service
telnet TELNET/SSH service
to End address of the range
web Web service
Default:
access management : disable
Usage Guide:
-50-