PLANET WGSW-48040HP - Manual (Page 265)

Command Guide of WGSW-48040HP
Switch (config-snmps-host)# spanning-tree link-type shared
4.2.163.9 spanning-tree mst cost
Command:
spanning-tree mst cost { | auto }
spanning-tree Spanning Tree protocol
mst STP bridge instance
instance 0-7 (CIST=0, MST1=1...)
cost STP Cost of this port
Cost range
auto Use auto cost
Default:
Auto
Usage Guide:
To configure the Path Cost of MSTI Port
Example:
To configure the Path Cost (321) of MSTI Port (MST 2)
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# spanning-tree mst 2 cost 321
4.2.163.10 spanning-tree mst port-priority
Command:
spanning-tree mst port-priority
spanning-tree Spanning Tree protocol
mst STP bridge instance
instance 0-7 (CIST=0, MST1=1...)
port-priority STP priority of this port
Range (lower higher priority)
Default:
Auto
-265-