PLANET WGSW-48040HP - Manual (Page 117)

Command Guide of WGSW-48040HP
To configure (QoS class, DP level) to (PCP, DEI) Mapping of QoS as below table for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos map cos-tag cos 1 dpl 1 pcp 6 dei 0
4.2.45.91 qos map tag-cos
Command:
qos map tag-cos pcp dei cos dpl
qos Quality of Service
map QoS Map/Table configuration
tag-cos Map for tag to cos configuration
pcp Specify PCP (Priority Code Point)
Specific PCP
dei Specify DEI (Drop Eligible Indicator)
Specific DEI
cos Specify class of service
Specific class of service or range
dpl Specify drop precedence level
Specific drop precedence level or range
Default:
Disabled
Usage Guide:
To configure (PCP, DEI) to (QoS class, DP level) Mapping of QoS for specific interface
Example:
To configure (PCP, DEI) to (QoS class, DP level) Mapping of QoS as below table for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos map tag-cos pcp 4 dei 0 cos 5 dpl 1
-117-