PLANET WGSW-48040HP - Manual (Page 141)

Command Guide of WGSW-48040HP
Switch (config-if) # switchport voice vlan discovery-protocol lldp
4.2.45.132 switchport voice vlan mode
Command:
switchport voice vlan mode auto | disable | force
switchport Switching mode characteristics
voice Voice appliance attributes
vlan Vlan for voice traffic
mode Set Voice VLAN port mode
auto Enable auto detect mode
disable disjoin Voice VLAN
force Force to join Voice VLAN
Default:
Disabled
Usage Guide:
To configure Voice VLAN mode for specific interface
Example:
To configure Voice VLAN mode (Auto) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport voice vlan mode auto
4.2.45.133 switchport voice vlan security
Command:
switchport voice vlan security
switchport Switching mode characteristics
voice Voice appliance attributes
vlan Vlan for voice traffic
security Enable Voice VLAN port security mode
Default:
-141-